UHF Female (SO-239) 4-Hole Panel Mount Solder Connector For RG-8, RG-11, RG-83,
UHF Female (SO-239) 4-Hole Panel Mount Solder Connector For RG-8, RG-11, RG-83, RG-213, RG-393, And Other 0.405" OD Coax
- SO-239, UHF female 4-Hole Panel Mount Solder Connector
- Silver Plated Brass Body
- Gold Plated Brass Center Pin
- PTFE Dielectric
- “TGS”
This connector is made from a precision cast zinc body that is heavily plated with Silver for superior performance and value. Being cast the SO-239 can be produced in a way that there is no lip between the UHF female and the flange mount which makes installation easy. This SO-239 or UHF female 4-Hole Panel Mount Solder Connector has a PTFE dielectric and a gold plated brass center pin. The UHF female interface has 16 individually machined “V’s”. This is to ensure a perfect seat of any UHF male (PL-259), to this connector, every time.
Compatible with Coaxial Cable Types with a center conductor of 0.120 or less including but not limited to: RG-8, RG-11, RG-83, RG-213, RG-214, RG-393, LMR-400, Belden 8237, Belden 8267, Belden 8268, Belden 9011, Belden 9913, RG-8X, RG-59, RG-6, RG-62, RG-223, LMR-240, Belden 7916A, Belden 8241, Belden 9258, RG-58, RG-58A/U, RG-142, RG-400, LMR-195, LMR-200, Belden 9201, Belden 8219, Belden 8259, Belden 7807, RG-174, RG-178, RG-188, RG-196, LMR-100A, LMR-100, LMR-110, and Belden 8216 coaxial cable.
Installation: Drill a 5/8 inch (0.625”) hole for the solder cup to fit through, and allow for distance between the chassis and that solder cup, then drill four 0.138" holes that are 0.708 inches apart, equidistant from the center hole. Using four screws that are 0.125" diameter will attach the SO-239 to your chassis or panel.
This listing is for one connector.
These connectors are NOT made in the PRC (i.e., mainland China or it's territories). These are made in countries such as Germany, Italy, Mexico, and Taiwan.
This ships quickly and safely from Mississippi.
I will be glad to combine shipping on your order.