SignaLink USB Interface Sound Card

Used, very clean SignaLink USB sound card

Photos show the current jumper configuration.

You can see if this will work with your radio by checking jumper arrangements here:  https://tigertronics.com/sl_wirebm.htm

To access the jumper, it's easy.  Use a 3/32" Allen wrench to remove the fours screws on the front panel, and the four screws on the back panel. Slide the front panel away from the box, and the circuit board will slide out with it.   The jumper block can be rewired using the diagrams on the Tigertronics page listed above, or you can buy radio-specific prewired jumper blocks to match your radio.

What you will receive is what is shown in the photos, unless the listing specifies otherwise.

Ships quickly and safely from Mississippi.