MFJ-264 2500 Watt Dry Dummy Load, Fan Cooled, Factory Display

This is a never-sold MFJ factory display unit.  MFJ sells these with the dummy loads packaged seperately to keep them safe during shipping.  All you have to do is take out the cabinet screws,  insert the dummy loads, and you're in business.  Fan cooled.  DC power cable included.  This is a very clean display unitmfj-265

Here is what MFJ has to say about this dummy load:

MFJs 2500 Watt fan cooled dummy load handles any legal limit amplifier, and lets you tune-up your expensive amplifier fast and super easy. Works with all amplifiers, transceivers and transmitters from DC through 6 Meters. It can dissipate 2500 Watts average power for one minute on, ten minutes off. Handles 300 Watts continuous. SWR is less than 1.25 to 1 below 30 MHz and less than 1.4 from 30 to 60 MHz. Four 50 Ohm non-inductive super high energy density resistors are used.

Each has an incredibly high energy density of 7000 joules per cubic inch per second with a voltage gradient of 10 kV per inch! Detailed specifications and power curve are permanently silk-screened on the bronzed cabinet for easy reference.
Uses 12 VDC or 110 VAC. 8 1/4W x 4H x 9 1/2D in. SO-239 connectors. 5 pounds.

NOTE ABOUT FACTORY DISPLAY UNITS:

USED:  ebay requires items that have been used as retail displays to be listed as "used", even if they have never been sold.  This item has never been sold or placed into service. This is a fully-functional unit that was used as a static display either in MFJ's offices or as part of MFJ's hamfest display booth. As such, it may have cosmetic scuffs or scrapes on the cabinet, it may have some extra, tiny holes (usually two at the most) in the cabinet from security brackets on the hamfest displays. Hamfest displays often had a "show sticker" applied to the cabinet. If so, those have been removed, and there may be some adhesive residue left where the sticker once was. Goo-Gone and rubbing with a thumbnail will usually remove all or most of the residue. The residue is a cosmetic thing only. Some case screws may be missing, or may be mismatched. 

The photos here are of the actual item being sold, not "stock" photos. Please look closely at the photos, as those are the best guide to the cosmetic condition of the cabinet or case. If you'd like, you can always repaint the cabinet with readily available matte-finish black paint. 

As a demo/display unit, there is no factory warranty, but there is a 30 day warranty from FatCat.Parts on items sold as Used. Warranty does not cover cosmetics, it covers only the functionality of the item. No factory packaging or paperwork is included.

On all demo/display units, what is being sold is what is seen in the photos. If it is not in the photos, it is not included, unless the listing specifies it is included.

Ships safely and quicxkly from Mississippi.