MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ-1708B, RF Sensing, Transmit/Receive Switch
MFJ

MFJ-1708B, RF Sensing, Transmit/Receive Switch

Regular price $129.95 $0.00 Unit price per

MFJ-1708B, RF Sensing, Transmit/Receive Switch

Cosmetically very clean. 

DC power cable/pigtail included.

This is a display unit from the MFJ hamfest display booth. Never sold or put into service, but becuase it was a display item, eBay classes it as "used".

What MFJ says about this switch:

MFJ RF Sense Transmit/Reveive Switch

Replaced the MFJ-1708

Switches your antenna from receiver to transmitter using a relay. Shorts your receiver to ground during transmit. Use RF sensing with adjustable delay or PTT line. Has selectable open/short mute.

  • RF Sensing for radios that do not have a keying output when transmitting
  • Good isolation between transmit and receive ports.
  • Good SWR characteristics up to 450MHz
  • Receiver protection circuit to limit any transmit RF spikes
  • Control Line input for radios that have a key line output
  • A Mute output that can be set to ground to mute or open to mute.
  • Power off bypass setting the transmitter to the antenna
  • Adjustable receive delay 50ms to 4 secondsRF sensing switch

NOTE ABOUT FACTORY DISPLAY UNITS:

USED: This has never been sold or placed into service. This is a fully-functional unit that was used as a static display either in MFJ's offices or as part of MFJ's hamfest display booth. As such, it may have cosmetic scuffs or scrapes on the cabinet, it may have some extra, tiny holes (usually two at the most) in the cabinet from security brackets on the hamfest displays. Hamfest displays often had a "show sticker" applied to the cabinet. If so, those have been removed, and there may be some adhesive residue left where the sticker once was. Goo-Gone and rubbing with a thumbnail will usually remove all or most of the residue. The residue is a cosmetic thing only. Some case screws may be missing, or may be mismatched. 

The photos here are of the actual item being sold, not "stock" photos. Please look closely at the photos, as those are the best guide to the cosmetic condition of the cabinet or case. If you'd like, you can always repaint the cabinet with readily available matte-finish black paint. 

As a demo/display unit, there is no factory warranty, but there is a 30 day warranty from FatCat.Parts on items sold as Used. Warranty does not cover cosmetics, it covers only the functionality of the item. No factory packaging or paperwork is included.

On all demo/display units, what is being sold is what is seen in the photos. If it is not in the photos, it is not included, unless the listing specifies it is included.

Ships safely and quicxkly from Mississippi.