Autek WM1 Computing Meter, SWR/Watt Meter, Works Well, See Video

This is a  very clean Autek WM1.  The cabinet has a couple of tiny little marks that show in the photos, but they are insignificant enough I had to look for them.   The meter faces and the face of the cabinet show no flaws that I can see.  All print is intact on the silkscreening.

I tested this by putting it in line between an Icom 7300 and an antenna, using it to replace my Daiwa meter.  The power LED lit, and I zeroed the meters.   I set the meter to 200 watts, and average reading, and keyed the Icom.  I had previously tuned the antenna using the Daiwa, and the WM1 read within 4.8% of the Daiwa..   I changed the tuner just a bit, the Autek changed to follow it, and then went back to 1:1 when I set the tuner back to the original setting.   (In the video I should have said actual power was 95 watts, instead of 100 watts.)

If you want to calibrate the Autek, the instructions are in the users manual.  A really clean copy of the manual can be found at bama.edebris.com.

This ships quickly and safely from Mississippi.